Dell POWEREDGE M1000E - Manual (Page 5)

Dell -10GbE PTM Rev 1.0
5
About this Manual
This User Manual is for the Dell 10Gb Ethernet Pass Through II passs through module.
This manual describes the installation and basic use of Dell 10GbE 16 port Pass Through Module
for blade servers.
Intended Audience
This manual is intended for users and system administrators responsible for installing and setting
up the Dell 10GbE 16 port Pass Through Module for blade servers.
Conventions
The terms downlink (internal–from servers) and uplink (external–out to the world) are used
throughout the document. Downlink refers to server connections through the backplane where
Ethernet is used. Uplink refers to the outside network, where a different Ethernet protocol is used.
The term PTM is used to indicate the Dell 10GbE 16 port Pass Through Module.
Caution: This symbol indicates the possibility of physical injury to the user or
installer.