Dell Inspiron 15 (3537, Mid 2013) - Manual (Page 32)

32 | Replacing the I/O Board
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Gently slide the I/O board below the tab that secures it and snap the I/O board
into place.
2 Replace the screw that secures the I/O board to the computer base.
3 Connect the I/O-board cable to the connector on the I/O board.
Postrequisites
1 Replace the palm rest. See "Replacing the Palm Rest" on page 27.
2 Replace the keyboard. See "Replacing the Keyboard" on page 23.
3 Follow step 4 to step 5 in "Replacing the Optical-Drive Assembly" on page 17.
4 Follow step 3 and step 4 in "Replacing the Memory Module(s)" on page 14.
5 Replace the battery. See "Replacing the Battery" on page 11.
OM_Book.book Page 32 Monday, June 10, 2013 3:30 PM