Dell Inspiron 15 (3537, Mid 2013) - Manual (Page 51)

Replacing the Display Assembly | 51
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Place the display assembly on the computer base and align the screw holes on the
display assembly with the screw holes on the computer base.
2 Replace the screws that secure the display assembly to the computer base.
3 Connect the antenna cables to the wireless mini-card.
4 Connect the display cable to the system board.
5 Adhere the tape that secures the display cable to the system board.
Postrequisites
1 Replace the palm rest. See "Replacing the Palm Rest" on page 27.
2 Replace the keyboard. See "Replacing the Keyboard" on page 23.
3 Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" on
page 17.
4 Follow step 4 to step 5 in "Replacing the Optical-Drive Assembly" on page 17.
5 Follow step 3 to step 5 in "Replacing the Hard-Drive Assembly" on page 20.
6 Replace the battery. See "Replacing the Battery" on page 11.
OM_Book.book Page 51 Monday, June 10, 2013 3:30 PM