Dell Latitude E6530 (Mid 2012) - Manual (Page 35)

Smart Connect Configuration 35
7
Smart Connect Configuration
How to set up or re-configure a system for use with Smart Connect?
• BIOS Settings:
• Enable/Disable option: The Smart Connect enable/disable switch can
be found in the Smart Connect BIOS menu, located under the "Power
Management" menu or "Advanced" menu. The default state for this
option in BIOS is "disabled", unless the system was ordered with
Smart Connect enabled.
• Because this setting hides the device from Windows, disabling Smart Connect will
also prevent the Smart Connect Configuration application and driver installation
in Windows. If the Smart Connect Configuration application (described below) is
installed and the feature is disabled in BIOS, it will report a warning message
alerting the user that the feature is not functioning.
• If the Smart Connect feature is enabled in BIOS, and the Smart Connect
Configuration application and driver are not installed, an unknown device may
appear in the Windows device manager under the "System Devices" category with
the Hardware ID: INT33A0
• Automatic Disable: Smart Connect will automatically be disabled in
BIOS setup if:
• A non-SSD storage device (HDD or hybrid drive) is installed.
• System or HDD passwords are enabled (some systems).
• "Block Sleep" is enabled in BIOS setup (some systems).
• Intel Smart Connect Configuration Application and Driver package:
• The Smart Connect Configuration application and driver installation
package is a self-extracting executable file. If the system supports
Smart Connect, the file will be available for download from
http://support.dell.com/
IRT.book Page 35 Thursday, June 21, 2012 2:25 PM