Intel smart connect technology – Dell Latitude E6530 (Mid 2012) User Manual

Page 8

Advertising
background image

8

Intel Responsiveness Technologies - Dell Setup Guide

• The system may be configured to support both Rapid Start and

Smart Response on the same SSD device (configuration details

provided later in the document).

• Windows cannot be running in legacy ATA mode (as selected from the

storage/SATA BIOS settings menu). The system must be in AHCI,

RAID, Smart Response, or Rapid Start mode.

• Processor:

• System must have an Intel Core processor installed.

• Memory:

• System should have 8 GB of memory or less. The factory

configuration only supports 8 GB or less, and if a partition is created

manually to support larger configurations, the expected resume time

performance benefits may not be realized.

• Software/Drivers:

• Systems must have the Intel Rapid Start Technology driver installed.

• Other Limitations:

• Encryption:

Systems configured with a Dell Data Protection Encryption accelerator card do
not support Rapid Start.

Some software encryption vendor guidelines may recommend using Windows
hibernate in place of Windows sleep. If sleep is disabled, Rapid Start state will be
disabled automatically.

Dell does not support self-encrypting HDD's or SSD's with Rapid Start.

• Passwords:

Some Dell systems do not support Rapid Start when HDD (ATA security) or
system BIOS passwords are enabled.

Intel Smart Connect Technology

• Storage (also see "Appendix A" on page 39):

• Smart Connect software can only be ordered from the Dell factory on

systems ordered with an SSD.

• Smart Connect technology may work on some systems, with HDD or

hybrid HDD drives, but it is not recommended.

IRT.book Page 8 Thursday, June 21, 2012 2:25 PM

Advertising