Dell PowerVault MD3000 - Manual (Page 22)

Dell MD Storage Array vCenter Plug-in | 22
5
Click OK to enable automatic configuration backups.
Figure 16. Automatic Save Configuration Message Box
NOTE: The automatic backup script files are located under C:\Program Files (x86)\Dell\MD Storage
Array vCenter Plug-In\jetty\savecfg directory.
Initiate A Manual Save Configuration
To perform a manual save configuration, perform the procedure below:
1
Open the Storage Array Manager View. See Figure 14.
2
In the left pane, click the name of the storage array.
The storage array properties are displayed in the right pane.
3
In the right pane, click Manually Save Configuration link.
The Manually Save Configuration dialog box appears. See Figure 17.
Figure 17. Manually Save Configuration Message Box