Rubber foot, Removing the rubber foot, Replacing the rubber foot – Dell Vostro 230s (Early 2010) User Manual
Page 26
Back to Contents Page
Rubber Foot
Dell™ Vostro™ 230s Service Manual—
Slim Tower
Removing the Rubber Foot
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
Remove the
chassis support bracket
.
4.
Remove the
power supply
.
5.
Rotate the rubber foot and remove it from the computer.
Replacing the Rubber Foot
To replace the rubber foot, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.