System board, Removing the system board, Replacing the system board – Dell Vostro 230s (Early 2010) User Manual
Page 27
Back to Contents Page
System Board
Dell™ Vostro™ 230s Service Manual—
Slim Tower
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
Remove the
chassis support bracket
.
4.
Remove the
memory
.
5.
Remove the
heat sink and processor
.
6.
Remove any
expansion cards
7.
Disconnect all cables from the system board.
8.
Remove the screws that secure the system board to the computer.
9.
Slide the system board toward the front of the computer and carefully lift the system board out of the computer.
Replacing the System Board
To replace the system board, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.