Display assembly, Removing the display assembly – Dell Latitude 2120 (Late 2010) User Manual
Page 25
Back to Contents Page
Display Assembly
Dell Latitude 2120 Service Manual
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
keyboard
.
4.
Remove the
access panel
.
5.
Disconnect the speaker cable from the system board and remove it from its routing path.
6.
Disconnect the antenna cables from the WLAN card and then remove the cables from their routing path.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.