Dell 968w All In One Wireless Photo Printer - Manual (Page 75)

Maintenance Mode
To access Maintenance mode options:
1. From the main menu, press the up or down Arrow button to scroll to Maintenance.
2. Press the Select button .
* Factory default setting
From the Set IP Netmask menu, use the keypad to enter an IP address. Press the right
Arrow button to enter a set of numbers in the next field, or press the left Arrow button
to erase an entry. Press the Back button to save the settings.
NOTE: The IP netmask cannot be changed if DHCP is enabled.
Set IP
Gateway
Press the Select button to enter the Set IP Gateway menu.
From the Set IP Gateway menu, use the keypad to enter an IP address. Press the right
Arrow button to enter a set of numbers in the next field, or press the left Arrow button
to erase an entry. Press the Back button to save the settings.
NOTE: The IP gateway cannot be changed if DHCP is enabled.
Main Menu Mode Main Menu
Maintenance View Ink Levels
Clean Cartridges
Align Cartridges
Change Print Cartridges
Print Test Page
Call Diagnostics
Reset Defaults
Maintenance Mode Menu
Menu item Action
View Ink Levels Press the Select button to display the current ink level for each cartridge on
the screen.
Clean Cartridges Press the Select button to clean the ink cartridges.
Align Cartridges Press the Select button to align the ink cartridges.
Change Print
Cartridges
Press the Select button to view steps detailing how to change ink cartridges.
Print Test Page Press the Select button to print a test page.
Call Diagnostics Specify how your printer treats automatic calls for diagnostic support.
Off*