Osd warning messages – Dell P170s Monitor User Manual

Page 13

Advertising
background image

Operating the Monitor:Dell P170S/P190S Flat Panel Monitor User's Guide

file:///S|/SSA_Proposal/P170S_P190S/UG/operate.htm[7/8/2011 4:48:31 PM]

DDC/CI (Display Data Channel/Command Interface) allows you to adjust the monitor parameters (brightness, color balance, etc) via software applications on your

PC.

Default is "Enable". You can disable this feature by selecting "Disable".

For best user experience and optimum performance of your monitor, keep this feature enabled.

NOTE:

If user select "Disable", display Warning message box as below. Select "Yes" disable DDC/CI and

return to "Factory Reset" menu. Warning message time-out in 20 sec.

OSD Warning Messages

The following warning messages may appear on the screen indicating that the monitor is out of synchronization.

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See

Monitor Specifications

for the Horizontal and Vertical frequency ranges

addressable by this monitor. Recommended mode is 1280 X 1024.

NOTE:

The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a video signal.

or

Advertising