System board labels, System board labels -9, Table 5-1 – Dell OptiPlex Gxi User Manual
Page 74: System-board jumper settings -9
5-10
Dell OptiPlex GX
i
Midsize Systems Reference and Installation Guide
System Board Labels
Table 5-2 lists the labels for connectors and sockets on
your system board and riser board, and it gives a brief
description of their functions.
Table 5-1. System-Board Jumper Settings
Jumper
Setting
Description
BIOS
(default)
Reserved (do not change).
NICRST
(default)
Reserved (do not change).
PSWD
(default)
Password feature enabled.
Password feature disabled.
100
Reserved (do not use)
133*
Jumpered when the microprocessor’s internal speed is 133 MHz.
166*
Jumpered when the microprocessor’s internal speed is 166 MHz.
200*
Jumpered when the microprocessor’s internal speed is 200 MHz.
* One set of the speed jumper pins must have a jumper plug installed; otherwise, the system will operate at an undetermined speed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in your
online System User’s Guide.
jumpered
unjumpered