Removing the power-button board, Prerequisites, Procedure – Dell Alienware Alpha (Late 2014) User Manual
Page 29
Removing the Power-Button
Board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before Working Inside Your Computer
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
.
.
Procedure
1
Disconnect the power-button board cable from the system board.
2 Turn the chassis over and remove the antenna cable from the routing
guides on the power-button module.
3 Press the tabs on the power-button module to release the module from
the front panel.
4 Release the tabs at the bottom of the power-button module from the slots
on the chassis.
29