Post-requisites – Dell Alienware Alpha (Late 2014) User Manual
Page 86
Advertising
7 Turn on your computer.
A message is displayed to confirm that the CMOS settings are reset and
default BIOS setup has been loaded.
8 Press F1 to continue and wait till the operating system is completely
loaded.
9 Shut down your computer.
10 Remove the
.
11 Remove the
.
12 Remove the
13 Remove the
.
14 Remove the jumper plug from the CMOS jumper and replace it on the
password jumper.
Post-requisites
1
Replace the
2 Replace the
.
3 Replace the
4 Replace the
.
86
Advertising