Dell Inspiron 1420 (Mid 2007) User Manual
Page 41
Advertising
3.
Place each of the new speakers in the appropriate speaker slot.
4.
Replace the two M2.5 x 5-mm screws to secure the speakers to the base of the computer.
5.
Carefully route the speaker cable through the cable guide on the base of the computer.
6.
Connect the speaker cable to the system board.
7.
Replace the system board (see
Replacing the System Board
).
Back to Contents Page
NOTE:
For proper placement, align the slots on the speakers with the screw-hole guide posts on the base of the computer.
Advertising