Microprocessor module, Removing the microprocessor module – Dell XPS M140 (MXC051, Late 2005) User Manual

Page 59

Advertising
background image

Microprocessor Module: Dell™ XPS M140 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/cpu0.htm[2/21/2014 11:34:03 AM]

Back to Contents Page

Microprocessor Module

Dell™ XPS M140 Service Manual

Removing the Microprocessor Module

Replacing the Microprocessor Module

Removing the Microprocessor Module

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Handle the microsprocessor module with care. Hold the microsprocessor module by its edges and do
not touch the processor die (the small chip in the center of the module).

1. Follow the instructions in

Preparing to Work Inside the Computer

.

2. Loosen the three captive screws securing the microprocessor module cover, then remove the cover and set it

aside.

1

microprocessor module cover

2

captive screws (3)

NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the
microprocessor thermal-cooling assembly. Oils in your skin can reduce the heat transfer capability of the

Advertising