Battery, Removing the battery, Replacing the battery – Dell Inspiron X200 User Manual

Page 3

Advertising
background image

Back to Contents Page

Battery

Dell™ X200 Service Manual

Removing the Battery

1.

 

Ensure that the computer is turned off, suspended in a power management mode, or connected to an electrical outlet.

2.

 

If the computer is docked, undock it.

3.

 

Slide the battery lock latch on the bottom of the computer to the unlock position.

4.

 

Slide and hold the battery latch release on the bottom of the computer, and then remove the battery from the bay.

Replacing the Battery

1.

 

Slide the battery into the bay until the latch release clicks.

2.

 

Slide the battery lock latch into the lock position.

Back to Contents Page

 

 

 

NOTICE:

If you choose to replace the battery with the computer in standby mode, you have up to 1 minute to complete the battery replacement before

the computer shuts down and loses any unsaved data.

1 battery lock latch

2 battery latch release

CAUTION:

Use only Dell™ battery modules that are approved for use with this computer. Use of other types may increase the risk of fire or 

explosion.

Advertising