Dell Inspiron X200 User Manual
Page 32
Back to Contents Page
Memory Module and Mini PCI Card
Dell™ X200 Service Manual
Memory Module
Removing the Memory Module Cover
1.
If the computer is docked, undock it.
2.
Turn the computer over, loosen the captive screw from the memory module cover, and lift the cover.
Removing the Memory Module
1.
Use your fingertips to spread apart the securing clips on each end of the memory module connector.
The module should pop up.
2.
Remove the module from the connector.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the following procedure.
1 captive screw
2 memory module cover
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
NOTICE:
Handle memory modules by their edges, and do not touch the components on a module.
1
memory module