Using the printer software, Scanning photos – Dell 962 All In One Photo Printer User Manual
Page 47
Using the Printer
47
Using the Printer Software
NOTE: Some programs do not support multiple page scanning.
1
Turn on your computer and printer, and make sure they are connected.
2
Load your original document. For help, see "Load an Original Document Into the ADF" on
page 36 or "Placing Your Original Document on the Scanner Glass" on page 38.
3
Press Scan on the operator panel.
The Dell All-In-One Center appears on your computer screen.
4
Click Preview Now to see your scanned image.
NOTE: If the size of the scan (found in the lower right of the preview window) appears in red, you do
not have the system resources available to perform the scan at the resolution or size you have
selected. To correct this problem, either reduce your resolution or the size of your scan area.
5
Adjust the dotted lines to fit around the part of the image you want to print.
6
From the Send scanned image to drop-down menu, select your scan destination.
7
To further customize your scan job, click See More Scan Settings.
8
When you are finished customizing your image, click Scan Now.
Scanning Photos
1
Turn on your computer and printer, and make sure they are connected.
2
Load your original document. For help, see "Placing Your Original Document on the
Scanner Glass" on page 38.
3
Press Scan on the operator panel.
The Dell All-In-One Center appears.
4
Click Preview Now to view your scanned image.
NOTE: If the size of the scan (found in the lower right of the preview window) appears in red, you do
not have the system resources available to perform the scan at the resolution or size you have
selected. To correct this problem, either reduce your resolution or the size of your scan area.
5
Adjust the dotted lines to fit around the portion of the photo you want to print.
6
In the Send scanned image to: drop-down menu, select the photo program you want to
use.
NOTE: If the program you want to use is not listed, select Search for more... in the drop-down menu.
On the next screen, click
Add to locate and add your program to the list.