Replacing the computer cover – Dell Dimension 9100 User Manual
Page 10
Back to Contents Page
Replacing the Computer Cover
Dell™ Dimension™ 9100 Service Manual
1.
Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2.
Ensure that no tools or extra parts are left inside the computer.
3.
Close the cover:
a.
Pivot the cover down.
b.
Press down on the right side of the cover until it closes.
c.
Press down on the left side of the cover until it closes.
d.
Ensure that both sides of the cover are locked. If not, repeat all of
.
Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.