Print quality problems, The output is too light – Dell 1250c Color Laser Printer User Manual
Page 145
Troubleshooting
143
Print Quality Problems
NOTE:
In this section, some procedures use the Tool Box or the Status Monitor.
For more information about Tool Box, see "Understanding the Tool Box Menus" on
For more information about Status Monitor, see "Printer Status Window" on
The output is too light
Page breaks in unexpected
places.
Increase the setting for Fault Time-Out in the System
Settings menu in the Tool Box.
Job prints from the wrong
source or on the wrong print
media.
Check the
Paper Type
in the printer driver.
Print media does not stack
neatly in the output bin.
Turn the print media stack over in the MPF.
Action
Yes
No
1 The toner cartridges may be low or need to be
replaced. Confirm the amount of toner in each
toner cartridge.
1
Check the toner level in the Status tab in the
Status Monitor.
2
Replace the toner cartridges as necessary.
Is the problem recovered?
The task is
complete.
Go to action 2.
Problem
Action