Modem, Removing the modem – Dell Inspiron 9200 User Manual
Page 44
3.
Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.
4.
Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
Modem
Removing the Modem
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Turn the computer over, loosen the two captive screws from the cover, and lift the cover.
3.
Remove the M2.5 x 3-mm screw that attaches the modem to the system board.
4.
Pull up on the pull-tab to disconnect the modem from the connector on the system board.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.