Dell Precision M6500 (Late 2009) - Manual (Page 107)

Back to Contents Page
I/O and IEEE 1394 Board
Dell Precision™ Workstation M6500 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
Removing the Right I/O Board
Replacing the Right I/O Board
Removing the Left I/O and IEEE 1394 Board
Replacing the Left I/O and IEEE 1394 Board
Removing the Right I/O Board
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery .
3. Remove the access panel .
4. Remove the secondary hard drive .
5. Remove the hinge cover .
6. Remove the keyboard .
7. Remove the display assembly .
8. Remove the palm rest .
9. Remove the four screws that secure the right I/O board to the chassis.