Replacing the camera module – Dell Inspiron 14 (N4120, Early 2011) User Manual
Page 66
Advertising
66
Camera Module
12 Remove the camera module.
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Adhere the tape that secures the camera cable to the camera module.
4 Align the slots on the camera module with the alignment posts on the
display cover.
5 Replace the display bezel (see "Replacing the Display Bezel" on page 58).
6 Replace the display assembly (see "Replacing the Display Assembly" on
1
tape
2
camera cable
3
camera module
4
plastic scribe
4
1
3
2
Advertising