Replacing the vga connector board – Dell Inspiron 14 (N4120, Early 2011) User Manual
Page 74
Advertising
74
VGA Connector Board
Replacing the VGA Connector Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connector on the VGA connector board with the slot on the
computer base.
3 Connect the display cable to the connector on the system board.
4 Replace the screw that secures the VGA connector board to the computer
base.
5 Replace the hinge cover (see "Replacing the Hinge Cover" on page 71).
6 Replace the display assembly (see "Replacing the Display Assembly" on
7 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
8 Replace the keyboard (see "Replacing the Keyboard" on page 29).
1
screw
2
display cable
2
1
Advertising