Dell Latitude CPx H - Manual (Page 42)

support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 35
)LJXUH6\VWHP%RDUG$VVHPEO\
10. Remove the modem (if present).
11. Lift the system board assembly out of the bottom case assembly.
5HSODFLQJWKH6\VWHP%RDUG
1. Install the replacement system board.
2. Replace the modem (if present).
3. Replace the system board mounting screws.
4. Replace the microprocessor, the palmrest assembly, the display assembly
and the keyboard assembly.
NOTE: Be sure to transfer the memory module(s) to the replacement system
board assembly.
5. Replace the modular bay devices and any PC Cards or plastic blanks in the
PC Card slot.
6. Insert the diskette (or CD-ROM) that accompanied the replacement system
board assembly into the appropriate drive, and turn on the computer.
Follow the instructions on the display screen.
NOTE: After replacing the system board assembly, be sure to enter the sys-
tem’s service tag number into the BIOS of the replacement system board
assembly.
4-mm screw with
captive washers
system board assembly
bottom case assembly
M2.5x4
M2.5x10
10-mm screw (system
with modem)
or 4-mm screw (system
without modem)
white marks on
the system board