Installing the system board – Dell Vostro 330 (Early 2011) User Manual
Page 68
Advertising
Installing The System Board
1. Replace the thermal pads under the system board.
2. Replace the two thermal pads under the memory slots.
3. Replace the screws that secure the system board to the computer.
4. Replace the mounting post for the video card fan.
5. Connect the speaker cable.
6. Connect the five cables.
7. Connect the two cables.
8. Tie the cables using a cable clamp for better cable management.
9. Connect the SATA cables to the system board.
10. Connect the AV cable to the system board.
11. Replace the
.
12. Replace the
.
13. Replace the
.
14. Replace the
video card and heat sink assembly
15. Replace the
16. Replace the
17. Replace the
.
18. Replace the
.
After Working Inside Your Computer
68
Advertising