Installing the display panel – Dell Vostro 330 (Early 2011) User Manual

Page 80

Advertising
background image

Installing The Display Panel

1. Route all the cables through their routing slots.

2. Place the display panel on the frame.

3. Replace the screws that secure the display panel to the chassis.

4. Route the IR and Bluetooth cables through their respective routing holes.

5. Press the bezel on to the display till all the tabs snap into place.

6. Replace the web camera.

7. Carefully turn the assembly over.

8. Replace the screws that secure the front bezel to the chassis.

9. Route the IR cable and camera cable thorough their routing slots.

10. Connect the camera cables to the DSP board.

11. Connect the display power cable to the converter.

12. Route the Bluetooth cable through the routing slot.

13. Replace the

front bezel

.

14. Replace the

middle bezel

.

15. Replace the

processor

.

16. Replace the

processor heat sink

.

17. Replace the

processor fan

.

18. Replace the

video card fan

.

19. Replace the

video card and heat sink assembly

.

20. Replace the

system board shield

.

21. Replace the

front stand

.

22. Replace the

cover

.

23. Follow the procedures in

After Working Inside Your Computer

.

80

Advertising