Dell XPS 730 H2C (Late 2008) - Manual (Page 30)

5. Press the release latch on the hard drive fan and slide it away from the hard drive bays and lift to remove from the computer.
6. To install the hard drive fan, slide the fan between the hard drive bays until it snaps into place.
7. Connect the fan cable to the FAN_HDD connector on the Master Control Board (see Master Control Board ).
8. Replace the computer cover (see Replacing the Computer Cover ).
9. Connect your computer and devices to electrical outlets, and then turn them on.
Back to Contents Page
1 hard-drive fan release latch 2 hard drive fan