Dell XPS 730 H2C (Late 2008) - Manual (Page 34)

Back to Contents Page
Replacing the Power Supply
Dell™ XPS™ 730/730X Service Manual
1. Follow the procedures in Before You Begin .
2. Remove the computer cover (see Replacing the Computer Cover ).
3. Remove all hard drives installed in the interior hard drive bays (see Replacing a Hard Drive ).
4. Remove the hard drive fan, if applicable (see Replacing the Hard Drive Fan ).
5. Remove the two screws that attach the forward hard drive bay to the chassis.
6. Remove the forward hard drive bay from the chassis.
7. Remove the four screws that attach the power supply to the back of the computer chassis.
8. Disconnect the power supply harness from the power supply by depressing the two tabs and pulling the harness away from the power supply.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at the following location:
www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
1 screws (4) 2 hard drive bays