Dell IN2010NWFP Monitor - Manual (Page 7)

Electrical
Physical Characteristics
VGA, 720 x 400 31.469 70.087 28.3 -/+
VGA, 640 x 480 31.469 59.940 25.2 -/-
VGA, 640 x 480 37.500 75.000 31.5 -/-
VESA, 800 x 600 37.879 60.317 40.0 +/+
VESA, 800 x 600 46.875 75.000 49.5 +/+
VESA, 1024 x 768 48.363 60.004 65.0 -/-
VESA, 1024 x 768 60.023 75.029 78.8 +/+
VESA. 1152 x 864 67.500 75.000 108.0 +/+
VESA, 1280 x 1024 64.000 60.000 108.0 +/+
VESA, 1280 x 1024 79.976 75.025 135.0 +/+
CVT, 1600 x 900 - Analog & Digital 55.540 60.000 97.75 +/-
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Connector type
l D-sub: blue connector
Signal cable type
l D-sub: Detachable, Analog, 15 pin, shipped attached to
the monitor
Dimensions (with stand)
Height 361.8 mm (14.25 inches)
Width 486.2 mm (19.14 inches)
Depth 219.6 mm (8.65 inches)
Dimensions (without stand)
Height 292.9 mm (11.53 inches)
Width 486.2 mm (19.14 inches)
Depth 59.7 mm (2.35 inches)
Stand dimensions
Height 138.7 mm (5.46 inches)
Width 219.6 mm (8.65 inches)
Depth 219.6 mm (8.65 inches)
Weight
Weight with packaging 5.79 kg (12.75 lb)
Weight with stand assembly and cables 4.638 kg ( 10.21 lb)
Weight without stand assembly
(for wall mount or VESA mount considerations -
no cables)
4.14 kg (9.12 lb)
Weight of stand assembly 0.358 kg (0.79 lb)