Dell OptiPlex GX50 - Manual (Page 19)

Back to Contents Page
Control Panel and Badge
Dell™ OptiPlex™ GX50 Systems
Removing the Control Panel and Badge
Replacing the Control Panel and Badge
Removing the Control Panel and Badge
Small Form-Factor Desktop Computer
1. Open the computer cover.
2. Using a flat-blade screwdriver, release the tabs from the inside of the computer and remove the plastic computer cover
from the metal component.
Releasing the Tabs—Small Form-Factor Computer
1 Tabs (2 on each side)
3. To remove the badge, remove the accent door by pressing the middle of the door while lifting away the sides of the
door.
a. From inside the front bezel, push in on the two tabs on either side of the badge to release the badge.
b. Press on the badge until it is freed.