Dell OptiPlex GX50 - Manual (Page 56)

3. Reconnect any cables you removed in steps 1 and 2 of the previous procedure.
Removing the PCI Riser Board
NOTICE: To avoid damage to the expansion cards or the system board by ESD, ground yourself by touching an
unpainted metal surface on the back of the computer.
CAUTION: Use a wrist grounding strap as explained in " Precautionary Measures ."
1. Remove the expansion-card cage .
2. Remove the expansion cards installed in the slots.
3. Remove the two screws that attach the riser board to the expansion- card cage.
Replacing the PCI Riser Board
Follow the " Removing the PCI Riser Board " procedures in reverse order.
Back to Contents Page