Center control cover – Dell Latitude D810 User Manual
Page 9
Back to Contents Page
Center Control Cover
Dell™ Latitude™ D810 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer top-side up and open it.
3.
Remove the center control cover:
a.
Open the display all the way (180 degrees) so that it lies flat against your work surface.
b.
Starting on the right side of the computer, use a plastic scribe or flat-blade screw driver to pry up the center control cover.
c.
Lift the center control cover away from the computer, and lay it aside.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 center control cover