Dell PowerVault DL2200 CommVault - Manual (Page 9)

Release Notes
9
Management Issues
Table 4. Management Issues and Workarounds
Issue Description Workaround/Solution Applies to
USB device is not
recognized. When a USB storage
device is plugged into the
system, a device drive
letter does not
automatically appear in
the Windows explorer or
within an application that
uses the USB device. Use the Windows Storage
Manager to manually
assign a device letter. Click
Start
→ Administrative
Tools → Computer
Management. Under
Storage, click Disk
Management. Right-click
the associated disk and
select Change Drive
Letter and Paths to assign
an available drive letter to
the USB device.
DL2000
DL2100
DL2200
The CommVault
Simpana software
reports:
Invalid or
missing
device id
Occurs when you enable a
library within the storage
resources of the
CommVault CommCell
console, and one or
more mount paths
associated with that
library are offline. Before enabling the library,
select the library in the
CommCell console and
verify that all the mount
paths are online.
Right click any offline
mount path, if present,
and select Properties.
In the General tab,
under Status,
check the Enable Mount
Path option. DL2100
DL2200