Dell D1901N monitor - Manual (Page 10)

8
FRONT PANEL CONTROL
• Power Button
:
Press this button to switch ON/OFF of monitor’s power.
• Power Indicator:
Blue — Power On mode.
Orange — Power saving mode.
• MENU/ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Contrast/Brightness OSD status.
• ECO Hotkey(-)
Activates the ECO control when the OSD is OFF or navigate through
adjustment icons when OSD is ON or adjust a function when function
is activated.
• Image Ratio(+) :
Select monitor display mode. Press Image Ratio(+) button to change wide
mode or 4:3 mode.
• Auto/Source :
1.
2. Auto configure hot key: When the OSD is closed, press Auto/Source
button continuously about 2 second to do auto configure.
3. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
OSD Lock Function: To lock the OSD, press and hold the MENU button
while the monitor is off and then press power button to turn the monitor on. To
unlock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
NOTES
• Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally
packed at the factory.
When the OSD is off, press Auto/Source button continuously to select the
input source showed in the message bar. Press Menu/Enter button to
change to the selected source.