Dell D1901N monitor - Manual (Page 7)

CONTROLS AND CONNECTORS
SIGNAL CABLE
Connecting the Signal Cable: Plug the Signal Cable one end to LCD
monitor’s “DSUB-Input” socket , the other end to the computer’s VGA port and
tighten the two screws on the cable connector.
Connecting the Power Cord: Plug one end of the AC power cord to the
LCD monitor's AC input socket, and the other end to Wall outlet.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Figure 2 Connecting Cables
1. Power Cable
2 . Signal Cable
1 2