Dell PowerVault 745N - Manual (Page 10)

NOTICE: Failure to disconnect all external storage enclosures from your NAS
system before performing a system reinstallation may lead to data loss.
Disconnect all external storage enclosures from your NAS system prior to
continuing with this procedure.
NOTE: During reinstallation, you must use NIC 1 to connect the NAS system
to a network that includes your client system or directly to the client system.
NOTE: Turn off any external storage enclosures attached to your system.
3. Disconnect all external storage enclosures from your NAS system.
4. Insert the prepared USB Key into one of the USB connectors on the
PowerVault 745N.
5. Turn on the NAS system.
NOTE: There are three (3) USB connectors on the PV745. One (1) connector
is located under the front panel bezel and two (2) are located on the back
panel.
Initial Release: 2 January 2007 10