Dell PowerVault 745N - Manual (Page 3)

3. Click on Dell PowerVault NAS Reinstallation Console.
4. When prompted to open the file or save it to your computer, click Open.
5. Follow the prompts and accept the defaults to complete the installation.
When complete, an icon appears on your client system desktop labeled “Dell
PowerVault NAS Reinstallation Console.”
Preparing the USB Key
Because the USB key is used to boot the NAS system to start the reinstallation
process and to provide configuration information, the USB Key must be
configured with the necessary information.
NOTICE: This procedure deletes all existing data on the USB Key.
NOTICE: The following procedures can be performed on a USB Key larger
than 64MB in size, but the size of the USB Key capacity will change to 64MB
in size. This is NOT a permanent change.
NOTE: You must have administrator privileges on the client system to install
the Dell PowerVault USB Key Preparation Tool.
To configure the USB Key, perform the following steps:
1. Insert the USB Key into a USB port on the client system.
2. Insert the Resource CD that came with your NAS system into your client
system CD drive.
Initial Release: 2 January 2007 3