Dell Latitude D600 - Manual (Page 22)

Back to Contents Page
Base Latch
Dell™ Latitude™ D600 Service Manual
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the hard drive .
3. Remove the keyboard .
4. Remove the display assembly .
5. Remove the palm rest .
6. Remove the speakers .
7. Pull the base latch straight up and away from the computer base.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 base latch 1N487
2 computer base