Dell 5230dn Mono Laser Printer - Manual (Page 167)

Try one or more of the following:
• Remove the specified output bin.
• Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing without using the specified output bin.
59 Incompatible tray <x>
Only options designed specifically for this printer are supported.
Try one or more of the following:
• Remove the specified tray.
• Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing without using the specified tray.
61 Defective disk
Install a different hard disk before performing any operations that require a hard disk.
80 Routine maintenance needed
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary
to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
84 PC Kit life warning
The photoconductor kit is near exhaustion.
Try one or more of the following:
• Replace the photoconductor kit.
• Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing.
84 Replace PC Kit
The photoconductor kit is exhausted. Install a new photoconductor kit.
88 Cartridge low
The toner is low. Replace the toner cartridge, and then press the up or down arrow button until Continue appears,
and then press to clear the message and continue printing.
88.yy Replace cartridge
The toner cartridge is exhausted.
1 Replace the toner cartridge.
2 Press the up or down arrow button until Continue appears, and then press to clear the message.
Troubleshooting
167