Dell Latitude CPi A - Manual (Page 98)

Back to Contents Page
Installing the Microsoft
®
Windows
®
95 and Windows 98 Operating
System Drivers: Dell
™
Latitude
™
CPi A-Series System User's
Guide
General Instructions | Installing Video Drivers for Windows 95 | Installing Video Drivers for Windows 98 |
Installing Audio Drivers | Installing Software Wavetable | Installing Touch Pad Drivers | Installing MS-DOS
CD-ROM Drivers | Installing Infrared Drivers
General Instructions
NOTES: The following procedure requires you to turn off the computer. Before proceeding, print the
procedure. Also print the instructions for installing drivers for the Peripheral Component Interconnect
(PCI) video card and Token-Ring Network controller.
You must have administrator privileges to perform the following procedure. Dell recommends that you
check with your network administrator before performing this procedure.
If your computer uses Windows 95 or Windows 98, the computer is already configured to work with
the Dell Latitude C/Dock Expansion Station or C/Port Advanced Port Replicator (APR). Use the
following procedure the first time you turn on the computer.
CAUTION: Do not dock the computer before turning it on the first time.
Installing Docking Drivers
To install the C/Dock Expansion Station or C/Port APR drivers, perform the following steps:
1. If the computer has never been turned on, turn it on now while it is undocked and complete the
operating system setup. Then go to step 2.
If you have completed the operating system setup, turn on the computer and go to step 2.
For setup instructions, see the Dell-supplied operating system setup guide that came with the
computer.
2. Dock the computer.
The operating system creates a hardware profile for the C/Dock Expansion Station or the C/Port
APR.
3. Follow the instructions on the display to load the appropriate drivers for use with the C/Dock Expansion
Station or C/Port APR. When prompted, restart the computer.