Operation of control panel – Sharp R-217E User Manual

Page 26

Advertising
background image

E – 5

A35652,Russia R217E O/M,En

A35652,Russia R217E O/M,En

1.

2.

3.

COOKING

DEFROSTING

The cooking time will count down to “0”. When the cooking time reaches “0”, an audible signal will sound
and the oven will automatically turn off. If you wish to stop cooking before the end of the cooking time,
turn the dial back to “0” or simply open the door.
Everytime the door is opened, microwave activity stops immediately.

1. You can set the LIGHT UP DIAL while the POWER LEVEL indicator is lit. The POWER LEVEL

indicator will light while the oven door is open. It will also light for 3 minutes after a preceding operation.

2. Your oven is fitted with a safety feature. If the LIGHT UP DIAL remains at the “0” position for more

than 3 minutes, you must open the oven door or press the POWER LEVEL button before the dial can
be operated again.

3. Your oven will memorize the power level of the last operation. Simply press the POWER LEVEL button

and the last power level will be indicated on the control panel. If the elctrical power supply to your oven
should be interrupted, the memory will be erased.

4. The scale of the MEAT DEFROST GUIDE is calibrated, refer to the defrosting chart on page E-11 in

the cooking guides.
To defrost other types of food, select the DEFROST setting and rotate the LIGHT UP DIAL to the
required time.

5. The oven door may be opened at any time during the cooking process.

If you wish to continue cooking, close the door.

6. If you wish to change the power level or cooking time during operation, press the POWER LEVEL

button or turn the LIGHT UP DIAL to the desired setting.

Cooking time

Increasing unit

0-1 minute

15 seconds

1-4 minutes

30 seconds

4-15 minutes

1 minute

15-30 minutes

5 minutes

OPERATION OF CONTROL PANEL

Your oven can be programmed up to 30 minutes. The input unit of cooking (defrosting) time varies from 15
seconds to 5 minutes. It depends on the total length of the cooking (defrosting) time as shown on the table below.
When the oven is plugged in, the POWER LEVEL indicator will show HIGH. If you miss your desired level,
press the POWER LEVEL button until you reach the level again.

Select desired power
level by pressing the
POWER LEVEL button
until the POWER LEVEL
indicates “MED”.

Select DEFROST setting by
pressing the POWER LEVEL
button until the POWER
LEVEL indicates “DEFROST
(

HFPVJHJPRF

)”.

NOTE

Suppose you want to cook on MED for 10 min.

Suppose you want to defrost 0.5 kg meat.

The oven starts automatically.
The cooking time is shown by flashing.

Set the cooking time by
rotating the LIGHT UP
DIAL.

Rotate the LIGHT UP
DIAL to the weight of the
meat (0.5) as indicated
on the scale.

Advertising