Dell Precision T3500 (Early 2009) - Manual (Page 27)

Floppy Drive
Dell Precision™ T3500 Service Manual
Removing the Floppy Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the computer cover .
3. Remove the front bezel .
4. Remove the drives bezel .
5. Disconnect the power and data cables from the back of the floppy drive.
6. Push the sliding-plate lever down to release the floppy drive.
7. Remove the floppy drive from the computer.
Replacing the Floppy Drive
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the computer cover .
3. Remove the front bezel .
4. Remove the drives bezel .
5. Connect the power and data cables from the back of the floppy drive.
6. Push the sliding-plate lever down to secure the floppy drive in the computer.
7. Place the floppy drive in the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.