Setting up the monitor, Connecting your monitor, Connecting the blue vga cable – Dell ST2220T Monitor User Manual
Page 27: Connecting the white dvi cable, Connecting the hdmi cable
Back to Contents Page
Setting Up the Monitor
Dell™
ST2220T monitor User's Guide
Connecting Your Monitor
To connect your monitor to the computer:
1.
Turn off your computer and disconnect the power cable.
2.
Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use all the cables on the same computer.
Use all of the cables only when they are connected to different computers with appropriate
video systems.
Connecting the Blue VGA Cable
Connecting the White DVI Cable
Connecting the HDMI Cable
CAUTION:
Before you begin any of the procedures in this section, follow the
Safety Instructions
.
NOTE:
USB uplink cable needs to be connected for touch function.