Dell ST2220T Monitor - Manual (Page 28)

Connecting the USB Cable
After you have completed connecting the DVI/VGA/HDMI cable, follow the procedure below to connect the USB cable to the computer and complete your
monitor setup:
1. Connect the downstream USB connector (cable supplied) to an appropriate USB connector on your computer.
2. Connect USB peripherals to the upstream USB connectors on the monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems.
5. Use the cable holder on the back of monitor stand to organize the cables.
Connecting the Audio Cable
Connecting the audio cable:
1. Connect the audio cable from the audio-in port on monitor to the audio-out port on your computer.
2. Turn on the monitor and computer.
3. Use the cable holder on the back of monitor to organize the cables.
NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.