Dell E1709WFP Monitor - Manual (Page 17)

OSD Warning Messages
LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time
to run. You can enable this feature by selecting "Enable".
Factory Reset Reset all OSD settings to the factory preset values.
When the monitor does not support a particular resolution mode you will see the following message:
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Monitor Specifications for the
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1440 x 900.
You will see the following message before the DDC/CI function is disabled.
When the monitor enters the Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD