Setting up the monitor, Attaching the stand, Connecting your monitor – Dell E1709WFP Monitor User Manual

Page 22: Connecting the blue vga cable

Advertising
background image

Back to Contents Page

 

Setting Up the Monitor

Dell™ 

E1709W Flat Panel Monitor User's Guide

  

Attaching the Stand

  

Connecting Your Monitor

  

Organizing Your Cables

  

Removing the Stand Base

 

  

Removing_the_Stand_for_VESA_wall_mount

 

Attaching the Stand

 

 

Connecting Your Monitor

To connect your monitor to the computer:

1.

Turn off your computer and disconnect the power cable. 

2.

Connect the blue display connector cable to the corresponding video port on the back of your computer.  

Connecting the blue VGA cable

NOTE:

The stand is detached when the monitor is shipped from the factory.

 

To attach the base of the stand to the monitor stand:

1. Place the monitor stand base on a stable table top.

2. Slide the monitor stand body in the correct direction down onto the back until it clicks into place.

CAUTION:

Before you begin any of the procedures in this section, follow the

Safety Instructions

.

Advertising