Dell Latitude ST (Late 2011) - Manual (Page 30)

Installing The Wireless Local Area Network (WLAN) Card
1. Slide the WLAN card into its slot.
2. Tighten the screws that secure the WLAN card in place.
3. Connect the antennas according to the color code on the WLAN card.
4. Install the battery .
5. Install the bottom cover .
6. Install the label door .
7. Follow the procedures in After Working Inside Your Computer .
8. Optionally if the Latitude ST unit is shipped from the factory without a LAN driver and the driver is installed
manually, you will be prompted to turn on the WLAN. The following steps need to be performed to successfully
install the WLAN card.
a) Connect a USB keyboard to the computer and restart the computer.
b) Press the <F2> key at the Dell logo to “Enter Setup”.
c) Select <F9> to load defaults.
d) Select <F10> to Save settings and Exit.
WLAN will connect automatically after windows starts up.
30