Dell Latitude ST (Late 2011) - Manual (Page 48)

15. Lift up the system board and remove it from the computer.
Installing The System Board
1. Tighten the screw that secures the system board to the middle frame assembly.
2. Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable,
speaker cable, and the coin-cell battery cable.
3. Connect and flip down the securing clips of the power button board cable and I/O board cable.
4. Install the middle frame assembly .
5. Install the internal storage device .
6. Install the WWAN card .
7. Install the WLAN card .
8. Install the battery .
9. Install the bottom cover .
10. Install the phone SIM card .
11. Install the label door .
12. Install the SD memory card .
13. Install the digitizer pen .
14. Follow the procedures in After Working Inside Your Computer .
48